Zanussi ZWH 7160 P User Manual page 10

If your drain hose
looks like this (see
beside) you do not
require the "U"
piece". Just push the
hose firmly in to the
standpipe.
• Directly to a built-in drain pipe in the
room wall.
Connections overview
0.5 bar (0.05 MPa)
8 bar (0.8 MPa)
In the interest of the environment
The appliance should be connected to the
FOUL drainage system, the water will then be
taken to a sewage works for treatment before
being discharged safely into a river.
It is essential that these appliances are not con-
nected to the surface water drainage system as
this water is discharged directly into a river or
stream and may cause pollution.
If you require any further advice please contact
your local water authority.
10
The drain hose may be extended to a maxi-
mum of 4 metres. An additional drain hose
and joining piece is available from your Local
Centre.
min. 60 cm
max. 100 cm
~max.400 cm
max.
100 cm
min.
60 cm
www.zanussi.com