Adjusting The Display Brightness; Setting The Memory Function - Silvercrest SKRD 30 A1 Operating Instructions Manual

Handling and operation

Adjusting the display brightness

Prerequisite: The device is in the operational mode clock/standby operation.
♦ Press the Bass/AMS/Mode
display brightness is shown (H=bright or L=dim).
♦ Set, with the button Tune+
display to be brighter.
♦ Set, with the button Tune–
display to be darker.
♦ Press the Bass/AMS/Mode
move to the next menu item.

Setting the memory function

You can set up to 10 date reminders to which an automatic reminder will be
triggered. The function SdA (SdA=Special Day Alert) is useful as a reminder, for
example, of birthdays or other recurring events. The reminder occurs every year
on the same date.
Prerequisite: The device is in the operational mode clock/standby operation.
♦ Press the Bass/AMS/Mode
selected reminder date is shown alternating with the indicator SDA. Next to
the indicator SDA is the number of the memory slot for that date. Possible
reminders are SDA
♦ Select with the buttons Preset+
date to be set.
♦ Set with the buttons Tune+
With each button press the date is changed by one day. Holding down the
respective button for more than 2 seconds starts the speed setting.
►
♦ Press the button Lock/Mem.
function is to be triggered. The setting is carried out with the buttons Tune+
and Tune–
programmed reminder dates
♦ Press the Bass/AMS/Mode
move to the next menu item.
SKRD 30 A1
to SDA
0
NOTICE
Press the button AOT
for the currently selected memory slot. In the display -- -- is shown.
on the hour between 00 and 23. This setting applies to all
12
button three times. The current setting for the
7
, the display brightness to H if you want the
13
, the display brightness to L if you want the
12
button again to save the current setting and
7
button four times. The current setting of the
7
0.
and Preset–
11 10
and Tune– the date for this memory slot.
12
13
if you want to switch off the reminder function
5
to set the time of day at which the reminder
6
button again to save the current setting and
7
the memory slot for the
13
GB
CY
13