Handling And Operation; Switching On And Off; Basic Settings; Activating The Settings Menu - Silvercrest SKRD 30 A1 Operating Instructions Manual

Handling and operation

Handling and operation
In this section you receive important information for the handling and operation
of the device.
Switching On and Off
After the device has been connected to the power supply it is already switched
on. Via the On/Off
standby operation and radio.
NOTICE
► The On/Off switch
mains power. To completely disconnect the device from the mains power
the mains power cable plug

Basic settings

After the device has been connected to the mains power supply it shows the time
of day and the day of the week in the display
mode clock/standby operation.

Activating the settings menu

To activate the settings menu, whilst in the operational mode clock/standby operation,
press the Bass/AMS/Mode
begins to blink. Each further actuation of the Bass/AMS/Mode
to the next setting potential. The menu item sequence is:
▯ Setting the time of day
▯ Setting the date
▯ Adjusting the display brightness
▯ Setting the memory function
▯ Setting the time of day format
NOTICE
► The setting menu ends automatically if you do not actuate any buttons for
approx. 15 seconds. The executed setting is saved.
SKRD 30 A1
button you switch between the operational modes clock/
4
does not disconnect the device completely from the
4
must be pulled from the mains socket.
16
button. The time of day, shown in the display
7
3 . The device is in the operational
button switches
7
GB
CY
3 ,
11