Safety Guidelines - Smith SPS8 User Manual & Parts List

SPS8
• Always wear protective equipment, including ear protection and goggles.
• Never wear baggy or loose fitting clothing that can be caught on controls or
moving parts.
• The surface preparator can emit flying particles and debris during operation.
Never operate the machine near bystanders, animals or children.
• Check fluid levels and get acquainted with the controls, engine kill switch and
other safety controls (pg. 5).
• Do not operate the machine in an explosive atmosphere, near combustible
materials, or when gas fumes may not be properly dispersed.
• Repair any fuel leaks immediately and remove accumulated dust frequently
from the air filter system.
• Never leave the machine unattended when running, and you must hold onto
the handle with two hands when the cutter drum is engaged.
• Avoid contact with the muffler when the engine is hot, as it may cause
severe burns.
• When using a vacuum system, avoid hose contact with the muffler.
• Ensure that all guards are in place before the machine is operated, since
rotating and moving parts will cause injury upon contact.
• Make sure that the engine is shut down and the spark plug is disconnected
before servicing.
4

SAFETY GUIDELINES

Incorrect use of the surface planer can result in
property damage, personal injury, or death.
Be sure to read and follow all directions and
precautions as outlined in this manual.
SMITH Manufacturing 1-954-941-9744 www.SmithMfg.com 1/2009