Connecting To The Lan - Panasonic CF-37 Series Supplementary Instructions Manual

The following has been added.
<For CF-37VB6BAEM model only>

Connecting to the LAN

LAN Port
<For CF-37VB6BAEM model only>
Wake up from LAN
This model has an internal LAN port.
CAUTION
Do not insert a telephone line connector (including a PBX internal phone) into
the LAN port. Doing so may cause fire or electric shock.
This is a function to automatically power on the computer from a network server. To use this
function, it is necessary to have a network environment that accommodates Wake up from LAN
(for a Local Area Network).
When using this function, set [Wake up from LAN] to [Enable] with the Setup Utility.
( page 8)
NOTE
Be sure to connect the AC adapter, and enable the supply of power.
Make settings to allow the use of a Local Area Network.
Be sure to leave the LCD panel open when [Panel Switch] is set to [Suspend] or
[Hibernation] in the Setup Utility.
When using the Wake up from LAN function, User Password is not necessary even if
[User Password] has been set in the Setup Utility.
When [Wake up from LAN] in the Setup Utility is set to [Enable], remaining battery
power will dissipate in about three days. In particular, note that when the computer is
on standby using the suspend function, data in RAM memory may be lost. We recom-
mend that when not using the Wake up from LAN function, you should keep the
above setting on [Disable].
The Wake up from LAN function will not operate under the following conditions:
- When the computer has been placed in suspend or hibernation from MS-DOS
mode.
- When the computer has been shut down by pressing the power switch for more
than four seconds.
- When the password has been input incorrectly, and the computer has returned to
suspend, hibernation, or power off status.
7