Starting Up/Shutting Down - Panasonic CF-37 Series Supplementary Instructions Manual

Replace the "NOTE" for the following. "OPERATING INSTRUCTIONS (page 12)"

Starting Up/Shutting Down

Replace the first "NOTE" for the following. "OPERATING INSTRUCTIONS (page 16)"
4
NOTE
When using the files in the following folders available on the retail version of the
Windows CD-ROM, it is necessary to run a separate file decompression program.
\tsclient
\tools
To uncompress the file, it is necessary to have approximately 80 MB of free disk space
available on the hard disk.
To use the CD-ROM drive or DVD-ROM drive in MS-DOS mode, perform the opera-
tion below after modifying config.sys and autoexec.bat. (
dia Pocket Device").
File decompression method:
1 Turn your computer on.
When [Press <F2> to enter SETUP] is displayed, immediately press
2
Ctrl (until the menu is displayed).
3 Select [Command prompt only].
4 Insert the Product Recovery CD-ROM.
At the prompt, input the following:
5
L:\en\addfile Enter
Follow the message on the screen.
(If the computer enters the ECO mode while copying, press Ctrl . )
After this program is executed, the contents of the above folders will be decompressed
to the c:\util\win98add folder.
"OPERATING INSTRUCTIONS
NOTE
The power saving mode ([Power Schemes] in [Control Panel] - [Power Manage-
ment]) is factory set, so if there is no input from a key, the touch pad, or an external
mouse (when one is connected) for a certain interval of time, the power to the LCD
and hard disk is may be turned off (ECO mode). In addition, when the computer is
left alone, it automatically enters the suspend mode (
tion Functions").
The LCD will resume operation when the touch pad or an external mouse (when one
is connected) is used or a key is pressed.
[System Devices] in [Start] - [Settings] - [Control Panel] - [System] - [Device Man-
ager] may contain a device or devices bearing an exclamation mark or question
mark. This does not indicate a malfunction. Such a mark (exclamation or question
mark) will not be displayed if the operating environment of the device showing the
mark is corrected, by for instance installing the driver of the device.
"Using a Multime-
"
(page 15)
"Suspend/Hiberna-