Setting The Steam Iron Temporarily Aside; Putting The Steam Iron Away After Use; Cleaning; Casing - Lervia KH 1280 Operating Manual

t

Setting the Steam Iron Temporarily Aside

!
Fire Hazard!
Never leave the steam iron unattended when it is hot or switched on.
Set the temperature control to the position "Min".
Only put the steam iron down on its standing foot
ill. B.

Putting the Steam Iron Away After Use

Remove the power plug from the power socket.
Empty the water reservoir and clean the gliding sole
Wrap the power cord around the cable winding space
Place the cool steam iron horizontally on a soft, clean base.

Cleaning

Casing

Clean the casing only with a soft dry cloth.

Metal Parts

Clean the metal parts with a cloth slightly moistened with
water and a mild, non-foaming cleaning agent.

Troubleshooting

The steam iron puts out only little or no steam
The water reservoir in the steam iron is empty. Fill the water
reservoir with tap water (see "Filling with Tap Water").
The steam iron does not get hot
The steam iron is not plugged in or not switched on. Plug the
power plug into the power socket and set the temperature control
to the desired temperature.
The steam iron is defect. Have the defect steam iron repaired by
qualified technicians.
8
ab,
.
, ill. C.