Tips for utilisation Operation Filling with mains water...4 Plugging in and ironing Steam ironing Ironing with steam blast Temporarily setting the steam iron aside Taking the steam iron out of service Drip-Stop Function Cleaning Self-cleaning function ...6 Housing ...6 Metal parts...7 Troubleshooting...
All other use is deemed improper use. Safety instructions Risk of burns! • Grasp the steam iron only by the handle when it is hot. • This appliance is not intended for use by individuals (including children) with restricted physical, physio-...
The proximity of moisture presents a danger, even when the appliance is switched off. • You may not open the housing of the steam iron. Permit only authorised technicians to repair a defective appliance should repairs be necessary.
• Place the temperature regulator 7 into the position "MAX". • Heat the steam iron up for several minutes at this highest setting. • Remove the steam iron from the station q (see chapter “Tips for utilisation”). • Then iron a piece of material that is no longer required, to remove possible contamination from the sole of the iron e.
Never leave the steam iron unattended when it is hot or switched on. • Place the temperature regulator 7 into the position "MIN". • Place the steam iron only on the cable base 8 and insert it onto the station q. - 5 - . Otherwise it...
• Remove the plug from the wall power socket. • Empty the water tank and clean the sole of the iron e. • Place the cooled down steam iron on the station q and secure it, in that you slide the unlocking switch 0 into the position •...
Fill the water tank with mains water (See "Filling with mains water"). The steam iron does not get hot: The steam iron is not plugged in or is not switched on. Insert the plug into a wall power socket and adjust the temperature regulator 7 to the desired ironing temperature.