Related Manuals for Lervia KH 2400
Summary of Contents for Lervia KH 2400
- Page 1 KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM www.kompernass.com ID-Nr.: KH2400-06/07-V1...
- Page 2 Steam and dry iron KH 2400 Operating instructions...
-
Page 5: Table Of Contents
Steam ironing Using the steam burst button Using the spray-button Anti-scale system Using the calc clean button Drip-stop feature Using as a dry iron Care and cleaning instructions Emptying and storing the iron Disposal Warranty and customer service Importer Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. -
Page 6: Proper Use
KH2400 Steam and dry iron KH 2400 Proper use The steam and dry iron is intended pure- ly for ironing clothes in private house- holds. In addition, creases in hanging clothes, curtains, etc. can be removed using the vertical steam burst function. - Page 7 • Never place the steam iron on edges, for example table edges. It could tip and fall down. • Stand the steam iron only on its back end, or lay it in the support tray provi- ded on the ironing board. Never lean the hot iron against walls or other ob- jects.
-
Page 8: Parts Identification
• Do not fill the water tank with a li- quid other than water. You will other- wise damage the steam iron. • You may not clean the steam iron with solvents, alcohol or abrasive cleaning agents. You could other- wise cause damages. -
Page 9: Ironing Tips
When the iron is automatically shut off, the blue shut-off indicator light in water tank starts to flash. If you move the iron gently back and forth, it switches on again. The green heater monitor light when the temperature at the sole plate... -
Page 10: Steam Ironing
Set the temperature control knob the steam position and the heating light will illuminate. In this setting, the iron can be used as a steam iron once the heating light goes out. The heating light will illuminate and go out regularly during ironing as an indi- cation that the temperature control is working properly. -
Page 11: Using The Spray-Button
• Insert the plug into the wall socket. • Set the temperature control MAX. • Allow the iron to heat up until the heating light goes out and then lights again. • Remove the plug from the wall socket. -
Page 12: Drip-Stop Feature
The iron can be used as a dry iron, even if there is water in the water tank not put water in the water tank the iron is to be used as a dry iron for many hours. • Put the iron on the heel rest and then plug the iron into the mains. -
Page 13: Disposal
• On a stable surface, store the iron with storage cover in the horizontal position. • Let the iron cool down completely before storing. Disposal Do not dispose of the device in normal domestic waste. Dispose of the device over a registered waste disposal firm or through your communal waste disposal facility.