Table of Contents
Advertisement
SETTINGS > SERVICE
SERVICE
SENSOR UNIT MENU > SETTINGS > SERVICE
1. Press MENU.
2. Navigate to Settings (use the Rear scroll wheel or the
Navigator).
3. Navigate to Service (use the Front scroll wheel or the
Navigator).
4. Navigate to required item (use the Rear scroll wheel or
the Navigator).
True Focus
5. Press the
(
ZOOM
button) – to step through options.
the
6. Save the chosen selection by pressing
button).
SaveLogdata saves a log file on the CF card.
Default Settings resets all sensor unit settings back to fac-
tory settings. See the Appendix in this manual for a detailed
list of the default settings.
Firmware update: Download the latest firmware update for
the sensor unit from the Hasselblad website. Unzip the file
first and then transfer the ".cim" file to a CF card. Insert the
card in the camera and navigate to "Firmware update". The
sensor unit will then automatically update.
Tethered power offers options when using a Thunderbolt
to FireWire adapter, for example, on a MacBook Pro. This
particular configuration does not supply enough power
SETTINGS > ABOUT
ABOUT
SENSOR UNIT MENU > SETTINGS > ABOUT
The About box will tell you which firmware version is pres-
ent so you can see if you have the latest (which can be down-
loaded from the Hasselblad website). The serial number is
also displayed in case Hasselblad Support need to know it
for any eventual problem solving.
The About box also shows the focus calibration ID (which
must match the information on the grip display under 'Sys-
tem Status' to obtain the optimum performance). Each sen-
sor unit is carefully adjusted to match the corresponding
camera body, which in turn produces the matching verifica-
tions respectively. If you want to use different sensor units
with different camera bodies, please refer to a Hasselblad
Service Center for more information.
1. Press MENU.
2. Navigate to Settings (use the
Navigator).
3. Navigate to Service (use the
Navigator).
4. Navigate to About(use the
Navigator).
AE-L
) buttons – (or
) or
(
EXIT (MENU
Rear scroll wheel
or the
Rear scroll wheel
or the
Rear scroll wheel
or the
Select this option when using
a Thunderbolt to FireWire
adapter.
to the camera from the computer so in this case the "From
camera" option should be selected. Select "From host" for
all other configurations.
Firewire speed displays the setting for the current transfer
rate.
Menu
69
Select this option when using
other configurations than
a Thunderbolt to FireWire
adapter.
Navigator
Display
Zoom
Advertisement
Table of Contents
