Table of Contents
Advertisement
SENSOR UNIT
MENU / (EXIT) button
1
Opens and closes the menu system. Also used for various other tasks (EXIT
button, for example) as you issue commands navigating the menu system.
P1 button
2
Assignable button to access a specific function. Setting is made on sensor
unit or in the Camera Configuration tool in Phocus.
Navigation button
3
A four-way rocker button enabling you to browse images as well as navi-
gate the menu system.
Zoom- in/-out (Selection) button
4
Zoom-in /out rocker button for the preview image. You can zoom in to
view close-ups of previews for focus checking. You can zoom out to view
several at once and finally to view and select folders and media. Also acts
as a selection button for value setting on the sensor unit menu.
Display button
5
Steps through the various view modes for the preview image.
P2 button
6
Assignable button to access a specific function. Setting is made on sensor
unit or in the Camera Configuration tool in Phocus.
Ready-light
7
Indicates sensor unit condition.
(steady or blinking). Blinking
a CF card or sending data, for example) and so a new capture is not pos-
sible, although settings can be changed. Steady
is in 'sleep' mode and requires a few seconds to re-activate.
problem (an explanatory message will be displayed).
CCD and IR filter
8
The sensor is positioned behind a permanently mounted IR filter. Always
be very careful not to touch or scratch the surface of the filter when it is
exposed. Replace the protective cover whenever the sensor unit is not
mounted on a camera.
Databus connectors
9
For digital communication with camera body.
Retaining bar
10
Main support for sensor unit.
Safety catch
11
Prevents inadvertent removal of sensor unit.
'Sensor plane' index
12
For physical focus measurement in critical close-up work.
CF-card cover
13
FireWire port
14
For computer connection (please carefully note the orientation of the
FireWire plug when inserting into the sensor unit).
Flash sync and power connector ports
15
Flash sync ports and port for external power supply / battery adapter for
when the sensor unit is used with a view/large format camera. Protected
behind a rubber cover.
GREEN
signifies a new capture is possible
ORANGE
signifies the unit is busy (writing to
ORANGE
signifies the unit
RED
signifies a
10
1
5
3
4
6
2
8
9
10
11
12
13
Previous H2/
H3/H4D users
please note the
orientation of the
plug on the H5D!
14
15
7
Advertisement
Table of Contents
