Table of Contents
Advertisement
ISO SETTING ON SENSOR UNIT
SENSOR UNIT MENU > ISO
ISO and White Balance can be set either on the sensor unit, the grip or, when tethered, via Phocus.
On the sensor unit, the settings are automatically and simultaneously transferred from the sensor unit to the grip. Likewise
all changes on the grip are automatically transferred to the sensor unit display. Please note that the changes are only dis-
played on the sensor unit when the settings have been saved.
1. Press MENU.
2. Navigate to ISO (use the Rear scroll wheel or the Navigator).
3. Press the
True Focus
(
4. Save the chosen selection by pressing EXIT
WHITE BALANCE SETTING ON SENSOR UNIT
– PRESETS:
SENSOR UNIT MENU > WHITE BALANCE
1. Press MENU.
2. Navigate to White Balance (use the Rear scroll wheel or the Navigator).
3. Press the
True Focus
(
4. Save the chosen selection by pressing
White Bal. Setting
Setting description
Daylight
For general outdoor use in direct sunlight.
Cloudy
For general outdoor use in cloudy weather.
Shade
For general outdoor use in shady locations out of direct sunlight.
Flash
For general indoor use when using a normal flash/strobe system.
Fluorescent
For use when using fluorescent lighting (strip lights).
Tungsten
For use when shooting indoors under standard tungsten/B lamps.
Manual
For a manual setting
WHITE BALANCE SETTING ON SENSOR UNIT
– NUMERICAL VALUE SETTING:
SENSOR UNIT MENU > WHITE BALANCE
Manual setting allows a specific numeral setting.
1. Press MENU.
2. Navigate to White Balance (use the Rear scroll wheel or the Navigator).
True Focus
3. Press the
(
step through until you reach Manual.
Front scroll wheel
4. Use the
True Focus
5. Press the
(
cal setting.
6. Save the chosen selection by pressing
T i p
Assign a customizable button
for immediate manual white
balance adjustment in mixed
or rapidly changing lighting
situations.
) or
AE-L
(
) buttons – (or the
(MENU
button).
) or
AE-L
(
) buttons – (or the
EXIT (MENU
button).
AE-L
) or
(
) buttons – (or the
Navigator
or the
to access the dialogue.
AE-L
) or
(
) buttons to select the desired numeri-
EXIT (MENU
button).
T i p
Include a predetermined ISO
and /or WB setting in a cus-
tom profile for specific cases.
ZOOM
button) – to step through the available settings.
ZOOM
button) – to step through the available settings.
There are six 'White Balance'
presets plus a Manual setting
to choose from.
ZOOM
button) – to
Menu
58
Navigator
Display
Zoom
Advertisement
Table of Contents
