Epson TM-T20II Technical Reference Manual page 51

Barcode height reduction rate
• Not reduced (initial setting)
• 25%
• 50%
• 75%
Font A auto replacement
• Does not replace (initial setting)
• Font B
This function is enabled only when Number of columns is set to Standard mode.
Font B auto replacement
• Does not replace (initial setting)
• Font A
This function is enabled only when Number of columns is set to Standard mode.
Optional buzzer
 For information about how to connect the optional external buzzer, see
Optional External Buzzer" on page
 When the optional external buzzer is enabled, a cash drawer cannot be used. Be sure to
disable it when you use a cash drawer.
Enables/disables
• Disabled (initial setting)
• Enabled
Buzzer frequency (Error)
• Does not sound
• Sounds 1 time
• Sounds continuously (initial setting)
Sound pattern (Autocut)
Selectable from Patterns A to E
Initial setting: Pattern A
55.
Chapter 2 Setup
2
"Connecting the
51