JVC LT-40FH96 Service Manual page 142

Digital-In
The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a 480p picture
signal is being input to the DIGITAL-IN terminal. This option adjusts the position when a 480p
picture signal is being displayed on the screen. There are two types of 480p picture signals:
640x480 and 720x480. If the displayed picture is slightly shifted, the position can be adjusted
by selecting either SIZE1 or SIZE2.
Press the M
To DIGITAL-IN
π †
è
To enter
To select AUTO, SIZE1 or SIZE2
π †
Press the M
Notes:
• The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to the
Digital-In terminal and the picture is being displayed on the screen.
• You can select AUTO only when the signal is 480p for HDMI. When you select AUTO, the
televison will select "SIZE1" or "SIZE2" automatically.
Digital-In Audio
This feature is used if you have a DTV or HDMI
compatible component connected to your TV.
Press the M
To DIGITAL-IN AUDIO
π †
è
To select ANALOG, DIGITAL or AUTO
Press the Menu button when fi nished
Notes:
• If your DTV or HDMI component is capable of digital audio and video, choose DIGITAL. If
your DTV or HDMI component is capable of analog audio and digital video, choose ANALOG.
• Refer to your DTV or HDMI component's instruction manual for more information.
• When you select DIGITAL, select PCM on Digital Sound in the Digital Setup menu. See page
72.
• When you select AUTO, the television will select "ANALOG" or "DIGITAL" automatically,
depending on the audio input from the HDMI.
• When your input is DIGITAL-IN2, DIGITAL-IN AUDIO cannot be selected.
button
ENU
button to finish
ENU
button
ENU
Initial Setup
INITIAL SETUP
PREVIOUS
VIDEO-1 MONITOR OUT
DIGITAL-IN
DIGITAL-IN AUDIO
NEXT PAGE
SELECT OPERATE
INITIAL SETUP
PREVIOUS
VIDEO-1 MONITOR OUT
DIGITAL-IN
DIGITAL-IN AUDIO
NEXT PAGE
SELECT OPERATE
OFF
AUTO
DIGITAL
(1/5)
EXIT
MENU
OFF
AUTO
DIGITAL
(1/5)
EXIT
MENU
53