Monitor - Spectrum DX6 Instruction Manual

FUNCTION LIST
System Setup
Use System Setup to enter the System List from the Function
list without turning the transmitter off. A Caution screen will
appear that warns that RF will be disabled (the transmitter will no
longer transmit). Press YES if you are sure and want to access
the System List. If you are not sure, press NO to exit to the main
screen and continue operation.
If you do not press YES or NO, the system will exit to the main
screen and continue operation within approximately 10 seconds.

Monitor

The Monitor screen displays the servo positions for each channel
graphically and numerically. This is useful to verify programming
functions, trim settings, mix directions, etc. The numeric value is
directly relative to the travel adjust and mix values (e.g., 100%
travel adjust equals 100% value in the Monitor).
SPEKTRUM DX6 • TRANSMITTER INSTRUCTION MANUAL
WARNING: Do not press YES unless the model is turned
off or the model is secured.
EN


33