Delete Model; Copy Model; Model Reset; Sort Model List - Spectrum DX6 Instruction Manual

EN
SYSTEM SETUP

Delete Model

Use this selection to permanently delete a model from the model
select list. If you do not wish to delete a model, select Cancel to
exit the page.
1. To delete a model, highlight the model listed. Press to select
then roll to the model name. Press the scroll wheel to select.
2. Select DELETE to delete the model.

Copy Model

The Model Copy menu enables you to duplicate model
programming from one Model List location to another.
Use Model Copy to:
• Save a default model copy before experimenting with
programming values
• Expedite programming for a model using a similar
programming setup
IMPORTANT: Copying a model program from one model
memory to another will erase any programming in the
"To" model memory.

Model Reset

Use the Model Reset menu to delete all model programming in
the active model memory. Reset returns all model settings to the
default settings and erases all programming in the selected model.
After a model reset, it is necessary to re-bind.

Sort Model List

With this function you can sort the model order in the model
select function. This is helpful to group similar models together
to make them easy to find. To move a model, highlight the model
that you wish to move with the scroll wheel, then press the scroll
wheel to select it. Scroll the scroll wheel to move the selected
model to the position desired. Press the scroll wheel when you
have the model in the position desired.
18
To copy model programming:
1. Make sure the model program you wish to copy is active. If
the desired model program is not active, select Cancel and
change the active model in the Model Select menu.
2. Select the model memory next to "To" and scroll to the desired
model memory. Press the scroll wheel once to save the selection.
3. Select Copy and the Confirm Copy screen appears.
4. Select Copy to confirm. Selecting Cancel will return to the
System Setup screen.
5. Select the "To" model as the current model, then bind the
transmitter and receiver. Copying a model does not copy the
bind from the original model.
You cannot use the Model Copy screen to copy model
programming to an SD Card. To copy model programming to the
SD Card, please see "Transfer SD Card".
SPEKTRUM DX6 • TRANSMITTER INSTRUCTION MANUAL



