Removing the Coin-Cell Battery
1.
Follow the procedures in
2.
Remove the:
a.
base cover
b.
battery
c.
memory
d.
hard-drive assembly
e.
keyboard trim
f.
keyboard
g.
palmrest
3.
Perform the following steps to remove the coin-cell battery from the computer:
a. Disconnect the coin-cell battery cable from its connector on the system board [1].
b. Pry the coin-cell battery to remove it from the computer [2].
Installing the Coin-cell Battery
1.
Insert the coin-cell battery into its place on the system board.
2.
Connect the coin-cell battery cable to its connector on the system board.
3.
Install the:
a.
palmrest
b.
keyboard
c.
keyboard trim
d.
hard-drive assembly
e.
memory
f.
base cover
4.
Follow the procedures in
Before Working Inside Your
After Working Inside Your
Computer.
Computer.
37