System Setup Options - Dell Latitude E5250 Owner's Manual

System Setup Options

NOTE: Depending on the computer and its installed devices, the items listed in this section may or
may not appear.
Table 1. General
Option Description
System This section lists the primary hardware features of your computer.
Information
• System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership
Tag, Ownership Date, Manufacture Date, and the Express Service Code.
• Memory Information: Displays Memory Installed, Memory Available, Memory
Speed, Memory Channels Mode, Memory Technology, DIMM A Size, DIMM B Size,
• Processor Information: Displays Processor Type, Core Count, Processor ID,
Current Clock Speed, Minimum Clock Speed, Maximum Clock Speed, Processor
L2 Cache, Processor L3 Cache, HT Capable, and 64-Bit Technology.
• Device Information: Displays Primary Hard Drive, Dock eSATA Device, LOM MAC
Address, Video Controller, Video BIOS Version, Video Memory, Panel Type, Native
Resolution, Audio Controller, Wi-Fi Device, WiGig Device, Cellular Device,
Bluetooth Device.
Battery Displays the battery status and the type of AC adapter connected to the computer
Information
Boot Sequence Boot Sequence
Boot List Option
Advanced Boot This option allows you the legacy option ROMs to load. By default, the Enable Legacy
Options Option ROMs is disabled.
Date/Time Allows you to change the date and time.
Table 2. System Configuration
Option
Integrated NIC
Description
Allows you to configure the integrated network controller. The options
are:
• Disabled
• Enabled
Allows you to change the order in which
the computer attempts to find an
operating system. The options are:
• UEFI: LITEON IT LCS-256L9S-11 2.5
7MM 256 GB
Allows you to change the boot list option.
• Legacy
• UEFI
3
43