Audio interface settings
When using the
as an audio interface, you can make the following settings. Refer to each section for details.
Input settings LO CUT (→ P . 93)
COMP/LIMITER (→ P . 94)
In1/2 PHANTOM (→ P . 96)
PLUGIN POWER (→ P . 97)
In1/2 PAD(-20dB) (→ P . 98)
1/2 MS STEREO MATRIX (→ P . 86)
L/R MS-RAW MONITOR (→ P . 85)
DIRECT MONITOR (→ P . 74)
MONITOR MIXER (→ P . 75)
LOOP BACK (→ P . 77)
In1/2 MONO MIX (→ P. 88)
LINE OUT LEVEL (→ P . 84)
Tool
TUNER (→ P . 78)
74
(MULTI TRACK only)
(STEREO only)
(STEREO only)
Making direct monitoring settings
Sound that is input to the
before it passes through the connected computer or iPad.
This enables monitoring without latency.
1.
Press
.
2.
Use
to select "IN/
OUT", and press
3.
Use
to select "DIRECT MONITOR",
and press
.
STEREO
For STEREO skip to set 5.
can be output directly
.
MULTI TRACK