Recording Media - Sony nxcam HXR-NX3D1E Operating Manual

(Warning indicator pertaining to the
external media device)
The image database file may be damaged.

Check the database file by touching
(MENU)  [Setup]  [
Settings)]  [Repair Img. DB F.] the
recording medium.
The external media device is damaged.

(Warning indicator pertaining to
formatting of the external media device)
The external media device is damaged.

The external media device is not formatted

correctly.
(Warning indicator pertaining to
camera-shake warning)
The camcorder is unsteady, so camera-shake

easily occurs. Hold the camcorder steady with
both hands and record the image. However,
note that the camera-shake warning indicator
does not disappear.
(Warning indicator pertaining to
photo recording)
The recording media is full.

Photos cannot be recorded during processing.

Wait for a while, then record.
When [ REC Mode] is set to [Highest

Quality ] or [50p Quality
capture photos while recording movies.
Furthermore, if [ Frame Rate] is set to [24p]
or [25p], you cannot record photos while
the camcorder is in movie recording standby
mode.
Tips

You may hear a melody when some warning

indicators appear on the screen.
( Media
], you cannot
Description of warning messages
If messages appear on the screen, follow the
instructions.

Recording media

Cannot recognize the internal memory.
Format and use again.
The internal recording medium of the

camcorder is set differently from the default
format. Performing [Format] (p. 80) may
enable you to use your camcorder. This
will delete all data in the internal recording
medium.
Data error.
An error occurred during reading or writing

the internal recording media of the camcorder.
This may occur when you keep applying shock

on the camcorder.
Movies recorded on other devices may not be

played back.
Inconsistencies found in image database
file. Do you want to repair the image
database file?
Inconsistencies found in image database
file. Cannot record or play HD movies. Do
you want to repair the image database
file?
You cannot record or play back movies

because no movie management information
exists. If you touch
information is created and you can record or
play back movies.
Inconsistencies found in the image
database file. Back up and recover.
Recover, then import using the included
PC software.
Inconsistencies occur in the image database

file because high definition image quality
(HD) movie management information
, new management
GB