Making Good Use Of Your Camcorder; Deleting Images - Sony nxcam HXR-NX3D1E Operating Manual


Notes
When the INPUT1/INPUT2 (LINE/MIC/

MIC+48V) switch  or  is set to LINE, the
input level is fixed to +4dBu. Even if you reset
the ATT switch, the input level does not change.
 Set the channel to be recorded.
You can select the channel to be
recorded with REC CH SELECT
(INPUT1) switch .
The position Audio recorded on CH1,
of the REC CH2
CH SELECT
(INPUT1)
switch
CH1·CH2
CH1
Tips

To use a stereo microphone with 2 XLR (3PIN)

plugs, connect Lch to the INPUT1 jack  and
Rch to the INPUT2 jack , and set the REC
CH SELECT (INPUT1) switch  to CH1.
GB

INPUT1 CH1
CH2
INPUT1 CH1
INPUT2 CH2
Making good use of
your camcorder
The and icons indicate the 3D and
2D positions of the 2D/3D switch (p. 24),
respectively.

Deleting images

You can free media space by deleting
movies and photos from recording media.

Notes
You cannot restore images once they are

deleted. Save important movies and photos in
advance.
Do not remove the battery pack or the AC

Adaptor from your camcorder while deleting
the images. It may damage the recording media.
Do not eject the memory card while deleting

images from the memory card.
You cannot delete protected movies and photos.

Undo the protection of the movies and photos
to delete them, before you try to delete them
(p. 48).
Tips

If you start playing back an image by selecting it

from the Event Index screen, you can delete the
image using on the playback screen.
To delete all images recorded in the recording

media, and recover all the recordable space of
the media, format the media (p. 80).
Reduced-size images which enable you to view

many images at the same time on an index
screen are called "thumbnails. "
 Press (View Images) (p. 28).
(MENU)  [Edit/
 Touch
Copy]  [Delete].