Charging Time - Sony nxcam HXR-NX3D1E Operating Manual

3
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off
when the battery pack is fully charged.
4
When the battery is charged, disconnect the AC Adaptor from the DC IN
jack of your camcorder.

Charging time

Approximate time (min.) required when you fully charge a fully discharged battery pack.
Battery pack
NP-FV50
NP-FV70 (supplied)
NP-FV100
The charging times shown in the table above are measured when charging the camcorder at a

temperature of 25
C to 30 C (50 °F to 86 °F).
 
Tips

See page 97 on recording and playing time.

When your camcorder is on, you can check the approximate amount of remaining battery power with the

remaining battery indicator at the upper right on the LCD screen.
To remove the battery pack
Close the LCD screen. Slide the BATT (battery) release lever () and remove the battery
pack ().
GB
1
Charging time
C (77 °F). It is recommended that you charge the battery in a temperature range of 10

155
195
390