Embedded Web Server Rx - Utax 6555i User Manual

Installing and Setting up the Machine > Embedded Web Server RX

Embedded Web Server RX

If the machine is connected to the network, you can configure various settings using Embedded Web Server RX.
This section explains how to access Embedded Web Server RX, and how to change security settings and the host name.
For details on Embedded Web Server RX, refer to the Embedded Web Server RX User Guide.
NOTE
To fully access the features of the Embedded Web Server RX pages, enter the User Name and Password and click
[Login]. Entering the predefined administrator password allows the user to access all pages, including Document Box,
Address Book, and Settings on the navigation menu. The factory default setting for the default user with administrator
privileges is shown below.
Login User Name
Login Password
* Upper case and lower case letters are distinguished (case sensitive).
Settings that the administrator and general users can configure in Embedded Web Server RX are as follows.
Setting
Device The machine's structure can be checked.
Information [Configuration], [Counter],
Job Status Displays all device information, including print and scan jobs, storing jobs,
scheduled jobs, and job log history.
[Printing Jobs
[Scheduled
[Storing Job
Document Box Add or delete document boxes, or delete documents within a document box.
[Custom
Address Book Create, edit, or delete addresses and address groups.
[Machine Address
[One Touch
Device Settings Configure the advanced settings of the machine.
[Paper/Feed/Output],
[System]
Function Settings Configure the advanced function settings.
[Common/Job
[DSM
[Operation
Network Settings Configure the network advanced settings.
[General], [TCP/IP], [Protocol]
Security Settings Configure the security advanced settings.
[Device
Management Configure the advanced management settings.
Settings [Job
[History
*1 Displayed only when the optional FAX Kit is installed.
*2 The logged in user may not be able to configure some settings, depending on the permissions of the user.
NOTE
The optional FAX Kit is required in order to make use of fax functionality.
Here, information on the FAX settings has been omitted. For more information on using the FAX, refer to the FAX
Operation Guide.
Admin
Admin
[About Embedded Web Server
Status], [Printing Job
Jobs], [Sending Job
Log]
1
Box], [FAX Box]* , [Polling
Book], [External Address Book
Key]
[Original
Defaults], [Copy], [Printer], [E-mail],
1
Scan], [FAX / i-FAX]* , [Send and
Panel]
Security], [Send Security],
Accounting], [Authentication],
Settings], [SNMP], [System
Description
Log], [Sending Job
Log], [Storing Job Status],
1
Box]* , [Job Box Settings]
Settings],
Settings], [Energy Saver/Timer], [Date/Time],
[Scan to
Forward], [RX/Forward
[Network Security], [Certificates]
[ID Card], [Notification/Report],
Stamp], [Message Board], [Reset]
2-35
Administ-
rator
RX]
Status],
Folder],
1
Rules]* ,
General
User
❍ ❍
❍ ❍
❍ ❍* 2
❍ ❍* 2
❍
-
❍ -
❍
-
❍ -
❍ -