Using The Isis Driver - Kodak i800 Series User Manual

4 Using the ISIS Driver

Installation
A-61510 January 2005
The ISIS driver is included with the scanner. You can install the driver
from the CD.
1. Insert the CD into the drive.
2. Double-click the setup.exe file.
3. Follow the instructions on each screen as prompted.
After installation of the driver is complete, install your application
software on the host PC.
After your application software is loaded and launched, use the ISIS
driver software to setup your scanner.
A sample ISIS Driver application, called the Scan Validation Tool, is also
installed during this installation. This application can be used to validate
scanner functionality. The screen shots in this chapter (from the Scan
Validation Tool) document the ISIS Driver graphical user interface (GUI)
which is one option when creating your own application. If you choose to
use programmatic controls, refer to the appropriate Pixel Translations,
Inc. documentation which documents ISIS functionality. This
documentation includes the information you need to use the ISIS Driver
for RAM scanning which simulates an i800 Series Scanner in order for
you to begin development work without a physical scanner.
4-1