Kodak i800 Series User Manual page 115

Enabling Patch Codes
A-61510 January 2005
Patch Control allows you to select what patch types to recognize. One or
more patches can be selected at a time.
Enable Patch Codes
Codes box.
Recognition Modes
will recognize. You can select Level 2, Level 3, Feature Patch, or
Transfer Patch. Each of these patch types is described in detail below.
Patch Types Level 2, Level 3 and Transfer
used for image addressing. When the Patch Reader detects a patch, it
automatically assigns a new image address to the new document. This
eliminates the task of trying to determine where one document stops
and the next starts when an operator is viewing electronic images. It
provides a hierarchical document structure and offers an auto-batching
alternative.
The Patch Reader controls document level changes by automatically
sensing a predefined patch code and changing the document level
accordingly.
Patch 2 — assigns a Level 2 to the current document.
Patch 3 — assigns a Level 3 to the current document.
Patch T/Transfer Patch — assigns a predetermined level to the next
document. Defined by selecting Level 2 or Level 3 in the Definition box.
to enable Patch Codes click the Enable Patch
allows you to select the patch type the scanner
(Do not use these patches for production – they
are not to spec)
(Do not use these patches for production – they
are not to spec)
(Do not use these patches for production – they
are not to spec)
these patch types are
4-34