Kodak i800 Series User Manual page 8

Scanner setup
A-61510 January 2005
To set up the scanner:
1. Set up your scanner operating conditions:
simplex/duplex
starting image address
image order
lamp timeout
transport timeout
transport timeout response
length detection status and response
multi-feed detection status and response
page-on-demand or batch count mode
starting document count
batching parameters (batch level, count, start and
end-of-batch functions)
patch parameters (patch types to recognize, transfer patch
definition)
printing parameters (printing status, print font, orientation
and strings)
programmable keys
level to follow level rules
confirmation tone
image address formats
For information on programming these conditions, see Chapters
3 or 4 (depending on your driver). For other vendor tool kits, refer
to their documentation.
2. Select your Color table as appropriate for color document
scanning. See Chapters 3 or 4 (depending on your driver).
For other vendor tool kits, refer to their documentation.
2-2