Pride Mobility Legend 3-wheel Owner's Manual page 31

V I I I .
POWER SEAT (OPTIONAL)
Your Legend may be equipped with a power seat. The power seat actuator is designed to raise or lower the seat
automatically with minimal effort on the part of the operator.
WARNING! The power seat is intended for operation only while your scooter is stationary
and on a level surface. Its purpose is to aid you in reaching objects.
Strict adherence to the following safety rules is vital to your safety:
n
Do not attempt to raise or lower the seat while in motion!
n
Operate the power seat only on level ground.
n
Do not operate your scooter with the power seat elevated.
n
It is recommended that the scooter be driven only with the seat in the lowest
position.
Raising and lowering the power seat when traveling or when on an incline could cause the
scooter to tip over, resulting in serious injury an/or scooter damage. Keep the power seat
in its lowest position when traveling or when on an incline.
To operate your power seat:
If the toggle switch is mounted on the right side of the scooter:
1. Push the toggle switch lever forward to raise the seat.
2. Pull the toggle switch lever backward to lower the seat.
3. Release the toggle switch lever when you have attained your desired height.
If the toggle switch is mounted on the left side of the scooter:
1. Push the toggle switch lever forward to lower the seat.
2. Pull the toggle switch lever backward to raise the seat.
3. Release the toggle switch lever when you have attained your desired height.
Ensure your seat is in the lowest position before you attempt to drive your scooter again.
Legend/Rev D/July03
C O M F O R T
www.pridemobility.com
A D J U S T M E N T S
31