Image Source - Kodak V600 User Manual

KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector

Image Source

Problem
The S-Video image source
does not appear.
Only the start-up screen
appears and not the image
from the image source.
The image source is
connected but a No Signal
message appears.
30
Cause and Solution
Some inexpensive cables are not
compatible with the projector. Be sure to
use the cable that came with your
projector.
• Verify that the cables are connected
correctly. See "Connecting the
Projector" on page 6.
• Verify that the proper image source is
connected and that it is selected on the
Setup tab of the menus.
• Make sure that the image source is
turned on.
• Turn off everything and power up again
in the proper order. See "Turning Off the
Projector" on page 18. See "Starting the
Presentation" on page 7.
• Make sure that your laptop's external
video port is turned on. See the
computer manual for details.
• Verify that the cables are connected
correctly. See "Connecting the
Projector" on page 6.
• Verify that the proper image source is
connected and that it is selected on the
Setup tab of the menus.
• Make sure there are no bent pins in the
connectors.
• Make sure the image source is turned
on.
• Turn off everything and power up again
in the proper order. See "Turning Off the
Projector" on page 18. See "Starting the
Presentation" on page 7.
• Make sure that your laptop's external
video port is turned on. See the
computer manual for details.