Image Quality - Kodak V600 User Manual

Image Quality

Problem
Color or text is not being
projected.
Some text or fonts are not
sharp with a computer as an
image source.
Image isn't centered on the
screen.
Image is out of focus.
Image and menus are upside
down.
Image and menus are
reversed from left to right.
Solution
Adjust the brightness up or down until
the text is visible.
For optimal results, set the computer's
resolution to 800 x 600. (Refer to your
computer user manual.) But this projector
can compress resolutions up to
1024 x 768.
• Be sure that the projector is at a 90°
angle to the screen.
• Reposition the image. See "Setting Up
the Image Source" on page 14.
• Turn the projection lens to focus the
image.
• Make sure that the projection screen is
at least 3 ft (.9 m) from the projector.
• Check the projection lens to see if it
needs cleaning.
• If projecting from a ceiling mount,
make sure that Ceiling Projection is
selected on the Setup tab in the Menu.
• If projecting from an upright position,
make sure that Front or Rear projection
is selected on the Setup tab in the
Menu.
• If projecting from behind a screen
make sure that Rear Projection is
selected on the Setup tab in the Menu.
• If projecting in front of a screen, make
sure that Front or Ceiling Projection is
selected on the Setup tab in the Menu.
Troubleshooting
25