Before You Begin; Preparing To Work Inside The Computer - Dell Inspiron 8200 Manual

Before You Begin: Dell Inspiron 8200
Back to Contents Page

Before You Begin

Dell™ Inspiron™ 8200

Preparing to Work Inside the Computer

Recommended Tools
Computer Orientation
Screw Identification
Preparing to Work Inside the Computer
CAUTION:
your computer. Damage due to servicing that is not authorized by Dell
is not covered by your warranty. Read and follow applicable safety
instructions in the Owner's Manual that came with the computer.
CAUTION:
working inside the computer.
NOTICE: To avoid damaging the computer, perform the following steps before
you begin working inside the computer.
1. Ensure that the work surface is flat and clean to prevent scratching the
computer cover.
2. Save any work in progress and exit all open programs.
3. Turn off the computer and all attached devices.
HINT: Before turning off the computer, ensure that the computer is not in a
power-management mode.
4. Ensure that the computer is undocked.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/begin.htm (1 of 6) [2/28/2004 7:40:48 AM]
Only a certified service technician should perform repairs on
Allow the computer to cool to room temperature before