Port And Access Name Settings - D-Link DCS-3511 User Manual

Configuration

Port and Access Name Settings

HTTPS
By default, the HTTPS port is set to 443. It can also be assigned to another port
number between 1025 and 65535.
Note: JPEG only transmits a series of JPEG images to the client. In order to utilize
this audio feature, make sure the video
mode is set to H.264 or MPEG-4 and the media option in "Client Settings" is set to
Video and Audio.
FTP
The FTP server allows the user to save recorded video clips. You can utilize D-Link's
IP Cam Wizard to upgrade the firmware via FTP server. By default, the FTP port is set
to 21. It also can be assigned to another port number between 1025 and 65535.
HTTP port/Secondary HTTP port
They can also be assigned to another port number between 1025 and 65535. To
access the Network Camera on the LAN, both the HTTP port and secondary HTTP
port can be used to access the Network Camera For example, when the HTTP port
is set to 80 and the secondary HTTP port is set to 8080. You can login camera as
example link as below:
Http://192.168.0.20 or
Http://192.168.0.20:8080
Authentication: Depending on your network security requirements, the
Authentication: Depending on your network security requirements, the Network
Camera provides three types of security settings for streaming via HTTP protocol:
disable, basic, and digest. If basic authentication is selected, the password is sent in
plain text format, but there can be potential risks of it being intercepted. If digest
authentication is selected, user credentials are encrypted using MD5 algorithm,
thus providing better protection against unauthorized access.
Access name for stream 1 ~ 4: This Network Camera supports multiple streams
D-Link DCS-3511/DCS-3530 User Manual 41