Port And Access Name Settings - D-Link DCS-7110 User Manual

Configuration

Port and Access Name Settings

HTTPS
By default, the HTTPS port is set to 443. It can also be assigned to another port number
between 1025 and 65535.
FTP
The FTP server allows the user to save recorded video clips. You can utilize D-Link's IP
Cam Wizard to upgrade the firmware via FTP server. By default, the FTP port is set to 21.
It also can be assigned to another port number between 1025 and 65535.
HTTP
By default, the HTTP port is set to 80 and the secondary HTTP port is set to 8080. They
can also be assigned to another port number between 1025 and 65535.
Authentication: Depending on your network security requirements, the camera
provides two types of security setting for an HTTP transaction: basic and digest. If basic
authentication is selected, the password is sent in plain text format and there can be
potential risks of being intercepted. If digest authentication is selected, user credentials
are encrypted using MD5 algorithm and thus provide better protection against
unauthorized accesses.
Access name for stream 1 ~ 5: The Network camera supports multiple streams
simultaneously. The access name is used to differentiate the streaming source. Users
can click Setup > Video > Video Settings to set up the video quality of linked streams.
RTSP
To utilize RTSP streaming authentication, make sure that you have set a password for the
camera first. Please refer to User Settings for details.
Authentication: Depending on your network security requirements, the camera
provides three types of security setting for streaming via RTSP Protocol: disable, basic,
and digest. If basic authentication is selected, the password is sent in plain text format,
but there can be potential risks of it being intercepted. If digest authentication is
selected, user credentials are encrypted using MD5 algorithm, thus providing better
protection against unauthorized access.
D-Link DCS-7110 User Manual 37