Wireless Settings - D-Link DCS-3511 User Manual

Configuration

Wireless Settings

* Wireless function for DCS-3530 only
Enable Wireless: Click to enable wireless function.
Site Survey: Click the Rescan button to scan for available wireless networks. After
scanning, you can use the drop-down box to select an available wireless network.
The related information (SSID, Wireless Mode, Channel, Authentication, Encryption)
will be automatically filled in for you.
SSID: Enter the SSID of the wireless access point you wish to use.
Wireless Mode: Use the drop-down box to select the mode of the wireless network
you wish to connect to. Infrastructure is normally used to connect to an access
point or router. Ad-Hoc is usually used to connect directly to another computer.
Channel: If you are using Ad Hoc mode, select the channel of the wireless network
you wish to connect to, or select Auto.
Authentication: Select the authentication you use on your wireless network - Open,
Shared, WPA-PSK, or WPA2-PSK.
Encryption: If you use WPA-PSK or WPA2-PSK authentication, you will need to
specify whether your wireless network uses TKIP or AES encryption. If you use Open
or shared authentication, WEP encryption should be the setting.
Default Key: If you use WEP, WPA-PSK, or WPA2-PSK authentication, enter the Key
(also known as password) used for your wireless network.
D-Link DCS-3511/DCS-3530 User Manual 40