Storing Your Own Sound Adjustments; Other Main Functions; Setting The Clock; Detaching The Control Panel - JVC KS-FX12 Service Manual

KS-F150
KS-FX12

Storing your own sound adjustments

You can adjust the sound modes (BEAT, POP, SOFT: see page 10) to your preference and
store your own adjustments in memory.
3
2 2
1
SOUND
Call up the sound mode you want to adjust.
See page 10 for details.
Within
5 seconds
2
To adjust the bass or treble sound level
Select "BAS" or "TRE."
LOUD
To turn on or off the loudness function
Each time you press LOUD, the loudness function turns on
and off alternatively. (= go to step 4)
Within
5 seconds
3
Adjust the bass or treble level.
See page 11 for details.
Within
5 seconds
4
Press and hold SOUND until the sound mode
SOUND
you have selected in step 1 flashes on the
display.
Your setting is stored in memory.
5
Repeat the same procedure to store other settings.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 10.
12

Detaching the control panel

You can detach the control panel when leaving the car.
When detaching or attaching the control panel, be careful not to damage the connectors on
the back of the control panel and on the panel holder.
How to detach the control
panel
Before detaching the control panel, be sure
to turn off the power.
1
Unlock the control panel.
2
Lift and pull the control panel
out of the unit.
3
Put the detached control
panel into the provided case.
14
1-6
1,4
How to attach the control
panel
1
Insert the left side of the
control panel into the groove
on the panel holder.
2
Press the right side of the
control panel to fix it to the
panel holder.
Note on cleaning the connectors:
If you frequently detach the control panel, the
connectors will deteriorate.
To minimize this possibility, periodically wipe
the connectors with a cotton swab or cloth
moistened with alcohol, being careful not to
damage the connectors.
Connectors

OTHER MAIN FUNCTIONS

Setting the clock

2,3
1 2,3
1
Press and hold the button for more than 2
seconds.
"CLOCK H," "CLOCK M" or "AREA" appears on the display.
2
1.
Set the hour.
1. Select "CLOCK H" if not shown on the
display.
2.
2. Adjust the hour.
3
1.
Set the minute.
1. Select "CLOCK M."
2.
2. Adjust the minute.
4
Start the clock.
To check the current clock time (changing the display mode)
Press DISP repeatedly. Each time you press the button, the display mode changes as follows.
During tuner operation: During tape operation:
Fre que nc y Clo c k
Play m o d e Clo c k

CD CHANGER OPERATIONS

We recommend that you use one of the CH-X series with your unit.
If you have another CD automatic changer, consult your JVC car audio dealer for connections.
• For example, if your CD automatic changer is one of the KD-MK series, you need a cord (KS-
U15K) for connecting it to this unit.
Before operating your CD automatic changer:
• Refer also to the Instructions supplied with your CD changer.
• If no discs are in the magazine of the CD changer or the discs are inserted upside
down, "NO CD" or "NO DISC" will appear on the display. If this happens, remove the
magazine and set the discs correctly.
• If "RESET 1 - RESET 8" appears on the display, something is wrong with the connection
between this unit and the CD changer. If this happens, check the connection, connect
the connecting cord(s) firmly if necessary, then press the reset button of the CD changer.

Playing CDs

¢
Number buttons
4
1
Select the CD automatic changer.
CD- CH
Playback starts from the first track of the first disc.
All tracks of all discs are played back.
Disc number
\
Track number
Note on One-Touch Operation:
When you press CD-CH, the power automatically comes on. You do not have to press
to turn on the power.
4
During CD operation:
Elap s e d
Clo c k
p lay ing tim e
13
1
Elapsed playing time
(The clock time is shown if you have
pressed DISP to see the clock time.
See page 13.)
15