Utax CD 1230 Instruction Handbook Manual page 247

Login/Logout
ADVANCED OPERATION GUIDE
5
Press [On]. To
disable job
accounting, press
[Off].
6
Press [OK].
7
When the display returns to the System Menu default screen, logout is
automatically executed and the screen to enter the Account ID appears. To
continue the operation, enter the Account ID.
If job accounting is enabled, the account ID is required to use the machine.
Login
1
In the screen below,
enter the account ID
using the numeric
keys and press
[Login].
NOTE:
If you entered a wrong character, press the Clear key and enter
the account ID again.
If the entered account ID does not match the registered ID, a warning beep
will sound and login will fail. Enter the correct account ID.
When the screen to enter the login user name and password appears
If user login administration is enabled, the screen to enter the login user
name and password appears. Enter a login user name and password to log
in. (Refer to Login/Logout on page 7-3.) If the user has already registered
the account information, the account ID entry would be skipped. (Refer to
Adding a User on page 7-4.)
2
Proceed to complete the rest of the steps.
User Login/Job Accounting - Job Accounting
Access the job accounting function.
Off
Status
Enter account ID.
******
Status
Management
On
Cancel OK
10/5/2006 10:10
Login
10/5/2006 10:10
7-11