Kodak EasyShare 350 User Manual page 30

Troubleshooting
Status Possible solution
IMPORTANT:
Printing stops
during mid-print
(paper stops
feeding and
Paper light
and/or On/Off
light may blink)
■
■
■
Print smudged
■
Print spotted
NOTE:
24
Use only the PH series Kodak color cartridge & photo paper kit
for your photo printer. Do not use inkjet paper.
Check paper:
1
Remove Paper tray
2
Check paper slot on back of photo printer.
3
Remove loose paper from photo printer. For paper jam, see
4
Inspect paper supply: make sure removable tabs are not detached
from paper. Reload with new paper.
5
Carefully "fan" paper to keep sheets from sticking together.
6
Re-fill tray. Do not exceed fill line.
7
Re-load Paper tray, then press On/Off button to resume printing.
Clean Paper-feed roller
Fingerprints may be on glossy side of paper. Handle paper by edges or by
removable tabs.
Check for dirty paper; wipe paper gently with dry, lint-free cloth to
remove dirt. For excessive dirt or debris, thoroughly clean Paper tray and
load new paper (page
Keep paper in the original protective wrap and remove and close the Paper tray and
Paper-tray door to keep dust and debris from collecting on the paper or inside the photo
page 2
printer ( ).
(page 6).
(page 19).
5). Check and clean Paper-feed roller
www.kodak.com/go/support
page 23.
(page 19).