Fuser Assembly - Samsung ML-6060 Service Manual

3-13 Fuser Assembly

1. Before you remove the fuser, you should remove:
-Main Cover (see page 3-5)
2. Remove four screws and unplug one connector,
and then remove the fuser assembly.
To remove the thermostat from the fuser assembly
Remove two screws and take the thermostat out.
Samsung Electronics
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
To remove the thermistor from the fuser assembly :
Remove one screw, and release the wire from the
three holders, and then take the thermistor out.
To remove the halogen lamp from the fuser assem-
bly :
Remove two screws and take the halogen lamp out
of the fuser assembly.
Note: When you reassemble the halogen lamp,
make sure that it is inserted into the slot
properly.
Disassembly and Reassembly
3-11