SF-330 Series Graphic Print Bar
Service Guide
3.2 Service Station Parts
The wipers and caps within the service station are designed to be replaceable. The other service station parts
including the motor may only be replaced by replacing the entire service station assembly.
3.3 Cap and Wiper Replacement
Removal
1. Move the carriage away from the service station. This may require rotating the bottom gear on the service
station to release the carriage lock (see Figure 3-2).
Rotate gear to
release
carriage lock
Figure 3-2. Service station viewed from the bottom showing the gear
which releases the carriage lock
Samsung Electronics Confidential
© Copyright Samsung Electronics Company 2002
Figure 3-1. Left side of the carriage bar showing the two motor mount screws
Screws
Wiper
Figure 3-3. Service station (viewed from the top) showing the direction to
push the cap/ wiper rotating assembly
Page 12
SF-330 Series Graphic Print Bar Service Guide
Cap
Revision 1.0; 23-Jul-02