Initial Settings Menu; Using The Initial Settings Menu; Digital Audio Out Settings - Pioneer DV-300-K Operating Instructions Manual

07

Initial Settings menu

Chapter 7
Initial Settings menu

Using the Initial Settings menu

The Initial Settings menu provides audio and
video output settings, parental lock settings,
and display settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
1 Press HOME MENU and select 'Initial
Settings'.
2 Use the cursor buttons and ENTER to
select the setting and option you want to
set.
All the settings and options are explained on
the following pages.

Digital Audio Out settings

Setting
Digital Out
Dolby Digital Out
DTS Out
96 kHz PCM Out
MPEG Out
32
En
Initial Settings
Option
On
Off
Dolby Digital
Dolby Digital > PCM
DTS
Off
96kHz > 48kHz
96kHz
MPEG
MPEG > PCM
Note
• In the table below, the default setting is
shown in bold: other settings are shown in
italics.
• The Digital Audio Out settings only need to
be set if you have connected the digital
output of this player to an AV receiver, or
other equipment.
• Check the operating instructions supplied
with your other equipment to see which
digital audio formats it's compatible with.
• Some settings, such as TV Screen, Audio
Language and Subtitle Language may
be overridden by the DVD disc. Often these
settings can also be made from the DVD
disc menu.
What it means
Digital audio is output from the digital outputs.
No digital audio output.
Dolby Digital encoded digital audio is output when playing a
Dolby Digital DVD disc.
Dolby Digital audio is converted to PCM audio before being
output.
DTS encoded digital audio is output when playing a DTS disc.
(Noise will be output if your amplifier/receiver is not
compatible with DTS audio.)
No digital audio is output when playing a DTS disc.
96 kHz digital audio is converted to 48 kHz for digital output.
96 kHz digital audio is output as is at 96 kHz.
MPEG encoded digital audio is output as is.
MPEG encoded digital audio is converted to PCM audio for
digital output.