Basic Playback Controls; Resume And Last Memory - Pioneer DV-300-K Operating Instructions Manual

Getting started

Basic playback controls

The table below shows the basic controls on
the remote for playing discs. The following
chapter covers other playback features in
more detail.
Button What it does
Starts playback.
If the display shows RESUME or
LAST MEM playback starts from the
resume or last memory point (see
also Resume and Last Memory
below.)
Pauses a disc that's playing, or
restarts a paused disc.
Stops playback.
See also Resume and Last Memory
below.
Press to start fast reverse scanning.
(remote Press (play) to resume normal
only)
playback.
Press to start fast forward scanning.
(remote
Press (play) to resume normal
only)
playback.
Skips to the start of the current
track, title or chapter, then to
previous tracks/titles/chapters.
Skips to the next track, title or
chapter.
Numbers
Use to enter a title/chapter/track
(remote
number. Press
only)
• If the disc is stopped, playback
starts from the selected title (for
DVD) or track (for CD/Video CD).
• If the disc is playing, playback
jumps to the start of the selected
title (VR mode DVD-RW), chapter
(DVD-Video) or track (CD/Video CD).
ENTER
to select.

Resume and Last Memory

When you stop playback of a DVD, CD, Video
CD or DivX video discs, RESUME is shown in
the display indicating that you can resume
playback again from that point.
If the disc tray is not opened, the next time you
start playback the display shows RESUME and
playback resumes from the resume point. (If
you want to clear the resume point, press
(stop) while RESUME is displayed.)
With DVDs and Video CDs, if you take the disc
out of the player after stopping playback, the
last play position is stored in memory. If the
next disc you load is the same one, the display
shows LAST MEM and playback will resume.
For DVD-Video discs, the player stores the play
position of the last five discs. When one of
these discs is next loaded, you can resume
playback.
Note
• The Last Memory function doesn't work
with VR format DVD-R/-RW discs.
• If you don't need the Last Memory function
when you stop a disc, you can press
OPEN/CLOSE to stop playback and
open the disc tray.
04
19
En