Wall-Mount Adjustment
Once the auto wall mount is installed, your TV's position can be easily adjusted.
Entering the menu
1. Press the ▲, ▼, ◄ or ► button on your remote control.
➣
The Wall Mount Adjustment screen is displayed.
➣
If the Wall Mount Adjustment screen is not displayed when
clicking on a direction button while watching your TV, use
the menu to display that screen.
• Press the MENU butt on to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER
• Press the ▲ or ▼ button to select "Wall-Mount Adjustment",
then press the ENTER
Remembering the Position
. Adjust to the desired position using the ▲,▼,◄,► buttons.
➣
If you press an arrow button when no OSD is displayed on
the TV screen, the Adjustment screen appears.
➣
Press the INFO button to reset. Press the ◄ or ► button to
select "Yes", then press the ENTER
The position is initialized to the default setting.
. Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either
Position 1, Position 2 or Position 3 in order to save the current
position.
➣
To not save the current position, press the RETURN button.
➣
When selecting a save mode, you cannot use the Colour
buttons.
. Press the ENTER
➣
When Position1 is selected, the message "Current position
saved as Position1" is displayed.
5. Press the ENTER
➣
The saved Position appears on the left side of the OSD.
Downloaded From TV-Manual.com Manuals
(Sold separately) (depending on the model)
TV Rear Panel
button.
button.
button to save.
button.
Auto Wall-Mount
SERVICE Cable (Not supplied)
button.
English - 5
Setup
TV
Plug & Play
Language
: English
Time
Wall-Mount Adjustment
Melody
: Off
Entertainment
: Off
Energy Saving
: Off
Move
Enter
Wall-Mount Adjustment
Position
1
Adjust
Save
INFO
Save
Select a mode to Save.
Position1
Position
Position
Adjust
Enter
Return
Return
Center