Auto Wall-Mount Adjustment (Sold Separately) (Depending On The Model) - Samsung Series 8 User Manual

Auto Wall-Mount Adjustment (Sold separately) (depending on the model)

Once the auto wall mount is installed, your TV's position can be easily adjusted.
Entering the menu
1. Press the ▲, ▼, ◄ or ► button on your remote control.
The Wall Mount Adjustment screen is displayed.
N
If the Auto Wall-Mount screen is not displayed when clicking on a direction
N
button while watching your TV, use the menu to display that screen.
- Press the MENU button to display the menu. Press the ▲ or ▼ button to
select "Setup", then press the ENTER E button.
- Press the ▲ or ▼ button to select "Wall-Mount Adjustment", then press
the ENTER E button.
Remembering the Position
2. Adjust to the desired position using the ▲,▼,◄,► buttons.
If you press an arrow button when no OSD is displayed on the TV screen,
N
the Adjustment screen appears.
Press the INFO button to reset. Press the ◄ or ► button to select "Yes",
N
then press the ENTER E button. The position is initialized to the default
setting.
3. Press the blue button. Press the ▲ and ▼ buttons to select a save mode from
either Position 1, Position 2 or Position 3 in order to save the current position.
To not save the current position, press the RETURN button.
N
When selecting a save mode, you cannot use the Colour buttons.
O
4. Press the ENTER E button to save.
When Position1 is selected, the message "Current position saved as Position1" is displayed.
N
5. Press the ENTER E button.
The saved Position appears on the left side of the OSD.
N
Moving to the remembered position
1. Complete Step 1 of "Entering the menu".
2. Pressing a Colour (Red, Green, Yellow) button moves the auto wall mount to
the saved position.
You can move the wall mount to one of the 3 pre-set positions by pressing
N
the Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.
If you adjust the Position after moving to a pre-set position, the position
N
display will disappear.
For installation, refer to the Installation Manual provided with the wall mount.
N
For product installation and the installation and moving of the wall mount, make sure to consult a specialized installation
N
company.
This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building materials,
N
please contact your nearest dealer.
The auto wall mount will not work when Anynet + or WISELINK Pro is operating.
N
37, 40 and 46 models are not compatible with the older wall mount model (WMN5090A).
N
TV Rear Panel
SERVICE Cable (Not supplied)
English - 
Auto Wall-Mount
Preference
Light Effect : Watching TV
Wall-Mount Adjustment
Melody : Off
Entertainment : Off
Energy Saving : Off
PIP
Software Upgrade
Common Interface
Wall-Mount Adjustment
Position  2 
Adjust Save
Save
Select a mode to save.
Position
Position2
Position
Move Enter
►
Centre
Return