Copying Pictures To Your Frame - Kodak EASYSHARE P750 Extended User Manual

Getting started

Copying pictures to your frame

Copying pictures to your frame's internal memory has never been easier. Each time
you insert a memory card or USB device, press OK and follow the copy directions.
CAUTION:
Do not remove a card or disconnect a device while copying. Your
card, pictures, or device could be damaged.
NOTE: Copies are automatically resized to a lower resolution (smaller size). Full resolution is unnecessary
for viewing and quickly fills up the frame's memory.
Copying from internal memory to a memory card or USB device is not supported.
To copy pictures anytime a slide show is playing, with a card or USB device inserted, press OK ,
highlight
8
1 Insert a memory card or USB device (flash drive,
card reader, hard drive).
The pictures start playing. A copy message appears,
"To copy pictures from <inserted source> to the
frame's internal memory, press OK."
2 Press OK.
3 Highlight your copy method:
This picture—copy the displayed picture.
All pictures in folder—copy all the pictures in a
folder (folder represents the folder name, if there
are any folders on the inserted card or device).
All pictures in source—copy all of the pictures on
the card or USB device (source represents the type
of card or device that's inserted in the frame).
4 Press OK.
The slide show plays while pictures are being copied.
(Copy), and continue with step 3 above.
www.kodak.com/go/support