Eastman Kodak Company reserves the right to change this information without notice, and makes no warranty, express or implied, with respect to this information. Kodak shall not be liable for any loss or damage, including consequential or special damages, resulting from any use of this information, even if loss or damage is caused by Kodak’s negligence or other fault.
Page 3
BACK COVER AY ........... MONITOR LCD AND VIEWFINDER AYs.
• USB PORT • 21-in. color MONITOR • 24-bit XGA VIDEO CARD • Color VIDEO MONITOR FEEDBACK SOFTWARE Region Provided Kodak LENS CLEANING PAPER Region Provided Kodak LENS CLEANER 1C8000 COVER CLEANER - Johnson SHINE-UP FURNITURE WAX TL-5182 LAMP - Arrowin LBF, 2001 light box, EVC/FGX, Phillips, 6958...
Page 5
Firmware file - “KP850100.FW” Kodak EasyShare SOFTWARE - Version 4.0 or higher * This item is provided by the region. If using Microsoft Windows XP and Kodak EasyShare SOFTWARE, Version 5.0, load only the DRIVERS for the CAMERA. ** These files are on the Kodak Partner Web site at https://partner.kodak.com/.
Figure 1 P252_0075BA Note • You must use the Kodak DOCK ADAPTER KIT D-22 when connecting the Kodak EasyShare P850 ZOOM DIGITAL CAMERA to the Kodak EasyShare CAMERA DOCK 6000. • The Kodak EasyShare P850 ZOOM DIGITAL CAMERA is compatible with: –...
• Korean • Chinese – simplified – traditional Japan Japanese 870 6467 Kodak Service & Support - bulk, class A English SP854 4561 Kodak Service & Support - retail, class A English SP172 0614 SP168 9801 Kodak Service & Support - bulk, class B English Kodak Service &...
Illustrated Parts List Visual Index P264_1011DC_ Item Description “BACK and SIDE COVER AYs, and CARD DOOR AY” on Page 10 “FRONT COVER, VIEWFINDER, and MONITOR LCD AYs” on Page 12 “CP1 BOARD - MCU, TOP COVER AY, and TB1 BOARD - SHUTTER AND MODE DIAL” on Page 14 “STROBE, BATTERY COMPARTMENT, and LENS AYs”...
SERVICE MANUAL Equipment Parts Caution • Dangerous Voltage • You must do a discharge of the STROBE CAPACITOR 1 after removing the BACK COVER AY. Figure 1 BACK and SIDE COVER AYs, and CARD DOOR AY P264_1000DCA P264_1000DC 11NOV05 – SM7648-1...
Page 11
Illustrated Parts List Figure 1 BACK and SIDE COVER AYs, and CARD DOOR AY Item Part No. Description Quantity Notes 3F9180 SCREW - STPG, 1.7 x 4.0 3F9127 SHAFT - card door 3F9126 SPRING - card door 3F9125 DOOR - card 3F9133 COVER - hot shoe 3F9172...
SERVICE MANUAL Caution • Dangerous Voltage • You must do a discharge of the STROBE CAPACITOR 2 after removing the MONITOR LCD AY. Figure 2 FRONT COVER, VIEWFINDER, and MONITOR LCD AYs P264_1001DCA P264_1001DC 11NOV05 – SM7648-1...
Page 13
Illustrated Parts List Figure 2 FRONT COVER, VIEWFINDER, and MONITOR LCD AYs Item Part No. Description Quantity Notes 3F9177 SCREW - STPG, 1.7 x 3.0 3F9176 SCREW - STPG, 1.7 x 3.5 3F9123 VIEWFINDER AY 3F9175 SCREW - PCS, 1.7 x 2.5 3F6121 SCREW - PCS, 1.7 x 2.5 3F9120...
SERVICE MANUAL Caution • Dangerous Voltage • You must do a discharge of both of the STROBE CAPACITORS after removing the TOP COVER AY and TB1 BOARD. Figure 3 CP1 BOARD - MCU, TOP COVER AY, and TB1 BOARD - SHUTTER AND MODE DIAL P264_1002DCA P264_1002DC 11NOV05 –...
Page 15
Illustrated Parts List Figure 3 CP1 BOARD - MCU, TOP COVER AY, and TB1 BOARD - SHUTTER AND MODE DIAL Item Part No. Description Quantity Notes 3F9178 SCREW - STPG, 1.7 x 3.5 3F9117 BOARD - TB1, shutter and mode dial 3F9181 SCREW - STPG, 1.7 x 4.5 3F9119...
[21] Check the energize sequence: • POWER LED illuminates green • MONITOR LCD: – displays “Kodak EasyShare System” for 2 seconds – displays the “AUTO” mode for 4 seconds – does not display error codes • LENS moves to the default “Wide” position...
Page 21
Diagnostics [22] De-energize the CAMERA. [23] Check the de-energize sequence: • MONITOR LCD displays black • LENS moves in • POWER LED de-energizes [24] Remove the CAMERA from the CAMERA DOCK. [25] Install a new BATTERY that has a full charge. [26] Energize the CAMERA.
Page 22
SERVICE MANUAL [40] Check the following BUTTONS and SWITCHES: BUTTON/SWITCH • “MENU” 1. Press the “MENU” BUTTON. • JOYSTICK 2. Check that the MONITOR LCD displays options. • OK 3. Press: • JOYSTICK up or down to move through the menu •...
Page 23
Diagnostics BUTTON/SWITCH ZOOM LEVER, “T” 1. Move the ZOOM LEVER to the “T” for “Tele”. 2. Check: • MONITOR LCD is in focus from the “Wide” to “Tele” positions • LENS moves from the “Wide” to “Tele” positions ZOOM LEVER, “W” 1.
Page 24
SERVICE MANUAL BUTTON/SWITCH “FOCUS” 1. Press: • “FOCUS” BUTTON • JOYSTICK down to set the mode to “Macro AF” • OK BUTTON 2. Check that the “Flower” icon displays on the MONITOR LCD. 3. Press: • “FOCUS” BUTTON • JOYSTICK down to set the mode to “Landscape” •...
Page 25
Diagnostics Selected MODE DIAL Option “Video” 1. Move the MODE DIAL to the “Video” icon. 2. Check: • “Video:” displays on the MONITOR LCD • FRAMING MARKS are disabled 3. Press and release the SHUTTER BUTTON. 4. During the video file recording, check: •...
Page 26
SERVICE MANUAL [42] Check one of the icons in the “SCN” position. For example, Selected “SCN” Icon: Backlight 1. Check: • “Backlight:” displays on the MONITOR LCD • FLASH is in “Fill” mode 2. Press the SHUTTER BUTTON. 3. Check that the CAMERA flashes once, then flashes again. [43] To check the operation of the FAVORITES SWITCH, move the MODE/POWER SWITCH to the “Favorites”...
Diagnostics BUTTON/SWITCH “AE/AF” Important “Automatic Exposure” is the default mode. 1. Press: • “MENU” BUTTON • JOYSTICK once to the right to display a menu for settings 2. Move the JOYSTICK to “AE/AF button set”. 3. Press: • OK BUTTON once to display the options •...
SERVICE MANUAL Checking the “Self-Timer” Function [1] Press the “DRIVE” BUTTON. [2] Check that the MONITOR LCD illuminates. [3] Use the JOYSTICK and the OK BUTTON to select “Self timer 10 sec.”. [4] Press the SHUTTER BUTTON to the “S2” position. [5] Check that an image is captured in 10 seconds.
Diagnostics [9] Energize the CAMERA. [10] Check that the green LED next to the VIEWFINDER blinks. Kodak P20 ZOOM FLASH Important If the customer sends a P20 ZOOM FLASH with the CAMERA, you must do this procedure. [1] Install the P20 ZOOM FLASH onto the HOT SHOE on the CAMERA.
SERVICE MANUAL Section 4: Adjustments LENS - “Electronic Image Stabilization (EIS) Shift Lens Adjustment” Adjustment Specification Purpose: To set the value for the position of the image on the LCD to the position of the LENS. Do When: After installing a new: •...
Page 31
Adjustments [4] Select “Monitor”. the center of the screen the center of the cross symbol SHIFT LENS ADJUSTMENT TARGET P264_9002AA Note • This is an example of the TARGET. • The actual TARGET does not have the lines or DOTS. [5] Check that the MONITOR LCD displays the TARGET.
Page 32
SERVICE MANUAL [7] Click “Test” to display the menu. [8] Select “EIS Adj”. [9] After the test, check: • result and adjustment value display • does not display “NG” [10] Click [OK]. Postrequisites: None 11NOV05 – SM7648-1...
Adjustments LENS - “EIS Confirmation and Adjustment” Adjustment Specification Purpose: To provide calibration information for the CP1 BOARD - MCU to adjust the position of the LENS. Do When: After installing a new: • CP1 BOARD - MCU • MONITOR LCD AY •...
Page 34
SERVICE MANUAL [4] Click [OK]. [5] In the “Cal Mode” field, type: 156 [6] Click [OK]. [7] In the “Cal Mode” field, type: 155 [8] Click [OK]. [9] Check that the “Dsc Calibration” window: • displays “Data1=155” • does not display “NG” [10] Click “Test”...
SERVICE MANUAL LENS - “Lens Adjustment (90 cm)” Adjustment Specification Purpose: To measure and store the values for the focus. Do When: After installing a new: • CP1 BOARD - MCU • MONITOR LCD AY • LENS AY Specification: The test results must comply with the specification values. •...
Page 37
Adjustments To Adjust: STAR TARGET P264_9001AA [1] Set the CAMERA 90 +/- 0.5 cm (35.4 +/- 0.2 in.) from the TARGET by using: • SLOT 4 • yellow holes in the CAMERA NEST • TRIPOD MOUNT [2] Do “Connecting to the SERVICE SOFTWARE” on Page [3] Click [Focus].
SERVICE MANUAL LENS - “Lens Adjustment (Infinity)” Adjustment Specification Purpose: To measure and store the values for the focus. Do When: After installing a new: • CP1 BOARD - MCU • MONITOR LCD AY • LENS AY Specification: The test results must comply with the specification values. •...
Page 39
Adjustments [4] Click “Test” to display the menu. [5] Select “Infinity Cal.”. [6] Check that the “Dsc Calibration” window: • displays the adjustments within the specifications • does not display “NG: X” [7] Click [OK]. Postrequisites: None SM7648-1 – 11NOV05...
SERVICE MANUAL CCD - “Auto White Balance (AWB)” Adjustment Specification Important Do not use the CAMERA DOCK in this procedure. Purpose: To measure and store the values for the color balance of red, green and blue for the CCD. Do When: •...
Page 41
Adjustments To Adjust: [1] Energize the PATTERN BOX. CAMERA PATTERN BOX (COLOR VIEWER) P264_9003AA [2] Set the PATTERN BOX: • color temperature: 3100 +/- 20 K • luminance: 900+/- 20 cd/m Important • The CAMERA LENS moves during the test. •...
Page 42
SERVICE MANUAL [5] Click [AWB]. [6] Click [Yes]. [7] Check that the “Dsc Calibration” window: • displays values that are within the specifications • does not display “NG” [8] Click [OK]. Postrequisites: None 11NOV05 – SM7648-1...
Adjustments CCD - “White Point Defect Detect” Adjustment Specification Important Do not use the CAMERA DOCK in this procedure. Purpose: To measure and store the values for the number of white pixels. Do When: • The image has pixels that should not be white. •...
Page 44
SERVICE MANUAL [3] Place the CAMERA 0 cm (0 in.) from the PATTERN BOX without entering any light. [4] Do “Connecting to the SERVICE SOFTWARE” on Page [5] Click “Test” to display the menu. [6] Select “CCD Defect”. [7] Click [Yes]. 11NOV05 –...
Page 45
Adjustments [8] Check that the “Dsc Calibration” window: • displays values that are within the specifications • does not display “detect_ng” [9] Click [OK]. Postrequisites: None SM7648-1 – 11NOV05...
SERVICE MANUAL CCD - “Black Point and White Point Defect Detect” Adjustment Specification Important Do not use the CAMERA DOCK in this procedure. Purpose: To measure and store the values for the number of black pixels. Do When: • The image has pixels that are not correct. •...
Page 47
Adjustments Important • The CAMERA LENS moves during the test. • Hold the CAMERA against the PATTERN BOX carefully to stop light from entering. [3] Place the CAMERA 0 cm (0 in.) from the PATTERN BOX without entering any light. [4] Do “Connecting to the SERVICE SOFTWARE”...
Page 48
SERVICE MANUAL [7] Check that the “Dsc Calibration” window: • displays values – “number=0” – “BK=0” – “WT=0” • does not display “detect_ng BLACK x, y” [8] Click [OK]. Postrequisites: None 11NOV05 – SM7648-1...
Adjustments PAF SENSOR - “Up and Down” Adjustment Specification Important Do not use the CAMERA DOCK in this procedure. Purpose: To measure and store the values for the up and down positions. Do When: • The image is not correctly aligned vertically. •...
Page 50
SERVICE MANUAL [5] Click [PAF Cal.]. [6] Check that the “PAF Calibration Dialog” window displays. [7] Select “ON”. The GRAPH displays. UP AND DOWN ADJUSTMENT TARGET P264_9004AA [8] Align the AF FRAME next to the center of the MONITOR LCD with the gray line in the TARGET. [9] Adjust the PAF SENSOR to the correct up and down positions at the same time checking the GRAPH and values.
Page 51
Adjustments [10] After adjusting the up and down positions, click [Up/Down Cal.] to set the adjustment value. [11] Check that the value displays “PAF_up_down: OK”. [12] Click [OK]. Postrequisites: None SM7648-1 – 11NOV05...
SERVICE MANUAL PAF SENSOR - “Uniform” Adjustment Specification Important Do not use the CAMERA DOCK in this procedure. Purpose: To measure and store the values to provide a uniform focus and light of the image. Do When: • The image focus and light are not uniform. •...
Page 53
Adjustments [4] Do “Connecting to the SERVICE SOFTWARE” on Page [5] Click [PAF Cal.]. [6] Check that the “PAF Calibration Dialog” window displays. [7] Click [Uniformity]. [8] Click [Yes]. SM7648-1 – 11NOV05...
Page 54
SERVICE MANUAL [9] Check that the value displays “State=Unif OK”. [10] Click [OK] to set and display the adjustment values. Postrequisites: None 11NOV05 – SM7648-1...
Adjustments PAF SENSOR - “Parallax” Adjustment Specification Important Do not use the CAMERA DOCK in this procedure. Purpose: To adjust the automatic focus feature of the CAMERA to prevent distortion or skew. Do When: • The image has skew. • After installing a new: –...
Page 56
SERVICE MANUAL [5] Click [PAF Cal.]. [6] Check that the “PAF Calibration Dialog” window displays. [7] Select “ON”. Note The GRAPH displays. PARALLAX ADJUSTMENT TARGET P264_9006AA 11NOV05 – SM7648-1...
Page 57
Adjustments [8] Align the AF FRAME next to the center of the MONITOR LCD with the TARGET. [9] Click [Parallax]. [10] Click [Yes] to continue. [11] Check that the values display. [12] Click [OK] to set the adjustment value. Postrequisites: None SM7648-1 –...
SERVICE MANUAL PAF SENSOR - “Distance” Adjustment Specification Important • Do not use the CAMERA DOCK in this procedure. • If the adjustment does not complete, the test starts again using the first temperature value. Purpose: To adjust the automatic focus feature of the CAMERA for distance. Do When: •...
Page 59
Adjustments Important The TARGET is in 3 sections with the labels “1”, “2”, “3”. DISTANCE ADJUSTMENT TARGET P264_9005AA [3] Assemble and adhere the TARGET to the wall. (a) Align the sections of the TARGET with the labels “1”, “2”, “3” from right to left. (b) Check that there are no spaces between the sections of the TARGET.
Page 60
SERVICE MANUAL [7] Check that the “PAF Calibration Dialog” window displays. [8] Click [Calibration]. [9] Click [Yes]. [10] Check that the distance value displays. 11NOV05 – SM7648-1...
Page 61
Adjustments [11] Determine if the adjustment value is within the specification. Note The test is not within specification if: • any of the 7 series display “NG” • “TEMP=0” displays [12] Click [OK]. Postrequisites: None SM7648-1 – 11NOV05...
SERVICE MANUAL Setting the Defaults for the CAMERA - “Set Default” Adjustment Specification Purpose: This feature allows the CAMERA to: • reset to the defaults • prepare for user mode Do When: After doing maintenance on the CAMERA. Specification: “Initialize Complete !!” displays. Special Tools: •...
Page 63
Adjustments [3] Select “Set Default”. Note All user values are reset to the defaults. [4] Check that “Initialize Complete !!” displays in the field. Postrequisites: None SM7648-1 – 11NOV05...
[4] If the serial numbers are not the same, enter the serial number from the CAMERA in the “Serial” field. [5] Click [Set]. [6] If the “VID” field does not have “Kodak”, type: Kodak [7] Click [Set]. 11NOV05 – SM7648-1...
Page 65
Adjustments [8] If the “PID” field does not have “Digital Camera”, type: Digital Camera [9] Click [Set]. [10] If the “Rev.” field does not have “1.00”, type: 1.00 [11] Click [Set]. Postrequisites: None SM7648-1 – 11NOV05...
SERVICE MANUAL Section 5: Replacements Important You must see the “Equipment Parts” on Page 10 for all parts information. BACK COVER AY Prerequisites: None To Remove: [1] Remove: • COVER from the side HOT SHOE COVER COVER • PLATE CN193 •...
Replacements MONITOR LCD AND VIEWFINDER AYs Prerequisites: [1] Remove the BACK COVER To Remove: [1] Remove the 3 SCREWS A. CN502 [2] Disconnect the CONNECTORS: CN801 • CN501 • CN171 [3] Remove: • MONITOR LCD AY • 2 SCREWS B [4] Disconnect the CONNECTORS: •...
SERVICE MANUAL FRONT COVER AY Prerequisites: [1] Remove: • BACK COVER AY • MONITOR LCD AND VIEWFINDER AYs To Remove: [1] Remove: • 4 SCREWS A • 2 SCREWS B • FRONT COVER AY FRONT COVER AY P264_1006GCA P264_1006GC To Install: [1] Reverse the steps in the removal procedure.
Replacements BATTERY COMPARTMENT AY, TB1 BOARD - SHUTTER AND MODE DIAL, AND ST1 BOARD - CAPACITOR Prerequisites: [1] Remove: • BACK COVER AY • MONITOR LCD AND VIEWFINDER AYs • FRONT COVER AY • CP1 BOARD - MCU To Remove: [1] Remove 2 SCREWS A.
Page 72
SERVICE MANUAL To Install: [1] Reverse the steps in the removal procedure. [2] Install: • CP1 BOARD - MCU • FRONT COVER AY • MONITOR LCD AND VIEWFINDER AYs • BACK COVER AY Postrequisites: None 11NOV05 – SM7648-1...
Replacements LENS, STROBE AY, MICROPHONE AY, and ST2, TB2, TB3 BOARDS Prerequisites: [1] Remove: • BACK COVER AY • MONITOR LCD AND VIEWFINDER AYs • FRONT COVER AY • CP1 BOARD - MCU • BATTERY COMPARTMENT AY, TB1 BOARD - SHUTTER AND MODE DIAL, AND ST1 BOARD - CAPACITOR To Remove: Important...
Page 74
SERVICE MANUAL • SCREW D • TB3 BOARD - AC ADAPTER/USB CONNECTOR • SCREW E • MICROPHONE AND SPEAKER AY • SCREW F • ST2 BOARD - STROBE POSITION • SCREW G • PAF AY To Install: [1] Reverse the steps in the removal procedure. [2] Install: •...
Load only the connection DRIVERS for the CAMERA. c. Continue with Step [3] From the Kodak Partner Site, make a copy of the .zip file of the “Software and Firmware” for the CAMERA. [4] Decompress 3 files from the .zip file. • “DscCalDi.exe” • “camapi32.dll”...
Page 76
SERVICE MANUAL [3] Click [Cancel]. [4] Double-click the “DscCalDi.exe” icon. [5] Check that the screen for the SERVICE SOFTWARE displays. [6] If the “Can not get version.” window displays when you run the SERVICE SOFTWARE: • Click [OK]. • Check: –...
Additional Service Procedures Preparing the Test Equipment Using the PATTERN BOX [1] Energize the PATTERN BOX. [2] Wait 30 minutes for the equipment to warm before using. [3] Adjust: • color temperature to 3100 +/- 20 K • luminance to 900 +/- 20 cd/m Using the CAMERA NEST Placement of Color of STICKERS for...
[6] Format the MEMORY CARD. [7] Make a folder in the root directory on the MEMORY CARD with the name “System”. [8] Obtain the firmware file “KP850nnn.FW” from the https://partner.kodak.com/ Web site. [9] Make a copy of the new version of the “KP850nnn.FW” file.
Additional Service Procedures Upgrading the Firmware Using the Internal Memory [1] Obtain the firmware “KP850nnn.fw” from the https://partner.kodak.com/ Web site. [2] Make a copy of the “KP850nnn.fw” file. [3] Remove the MEMORY CARD from the CAMERA. [4] Connect a USB CABLE to: •...
UNREG(SY) BOOST5.25V BOOST5.25V TO DMA(MAIN) ALWAYS3.2V VDD1 IC302 VDD2 ACPR CAMPWR BATTERY VDD3 BACKUP Q3001 RESET DOSCK DOCK SCK DOSB DOCK SB BAT_OFF DOOPS OP SERIAL CHGCTL DOCK CHG BATTERY USBCNT_D BACK UP DOCK USB USBCNT_C USB_CONNECT BACKUP_CTL Z3001 SCAN IN0 CHG ON IC301 SCAN IN1...
SERVICE MANUAL TB3 BOARD - AC ADAPTER/USB CONNECTOR T3-02300/SX823-WKO R6702 0;1/16Z TO USB/AV TO CP1(DMA)MAIN CN103 R6703 CN672 CN671 0;1/16Z 1AV4J11SJ082G 1AV4J11B7431G L6701 VIDEO VIDEO BK1608LM751 L6702 AUDIO AUDIO BK1608HM102 AVDET(G) AVDET(G) R6701 0;1/16Z L6703 FBMH1608HL300 DC JACK L6704 FBMH1608HL300 HEC3600-017010 JK671 TO CP1(PWA)
Publication History Section 8: Publication History Publication Publication Changed File Date Pages Name Notes 11NOV05 SM7648-1 sm7648_1.fm New Publication Kodak and EasyShare are trademarks of Eastman Kodak Company. Printed in U.S.A. • sm7648_1.fm EASTMAN KODAK COMPANY Rochester, NY 14650...