Trouble Shooting And Specification - Pride Mobility GOPHER Owner's Manual

7. T R O U B L E S H O O T I N G A N D S P E C I F I C AT I O N
● TROUBLE SHOOTING
Symptom
The scooter will not switch on
The scooter switches on, but the
scooter will not move.
The scooter appears slow
The seat turns when in operation
The handlebar appears loose
Involuntarily horn sounds
● SPECIFICATION
Remark: The manufacturer reserves the right to modify the specification if necessary. The final
specification is subject to the individual scooter you purchase from your dealer.
Model Reference
Dimension
(L x W x H mm)
Weight w/i (36Ah) battery
without battery
Battery
Charger
Front Tyre
Rear Tyre
Driving System
Brake System
Control Method
Max Speed
Climbing angle
Cruising range
Weight Capacity
Note:
Maximum driving distance is based on an ambient temperature of 20 C, a 75kg driver and a
brand new fully charged battery by a constant driving speed at 6.4 km/h with 70% battery power
discharged.
Remedy
Try recharging the battery
Check the fuse and circuit breaker in the scooter
Ensure there is enough power in the batteries. If not,
recharge the batteries.
Ensure the freewheel lever is engaged in the „DRIVE‟
position.
Check the battery power level and recharge
Check the speed dial is not set to slow.
Slowly rotate the seat until it drops in to place and is
secure
Tighten the height adjustment handle to secure the
handlebar
Ensure that the wigwag paddle is released.
Switch the scooter off and on.
Recharge the batteries.
If problem persists contact your WU‟S dealer.
Gopher
1200 x 580 x 1030 mm
87 kg
63 kg
36 AH (option 50AH)
300-4, 10" Solid Tyre
300-4, 10" Solid Tyre
Direct drive the rear wheels ( with differential gear)
Electromagnetic brakes
By speed control lever
6 KMH
20-30km (with 36Ah battery)
30-40km (with 50Ah battery)
19
Gopher DX
1200 x 580 x 1220 mm
93 kg
69 kg
CTE 4A
10 KMH
<8°
160 kg