Grounding Instructions - Waring WFP16SCD Owner's Manual

GROUNDING INSTRUCTIONS

For your protection, this appliance is equipped with a
3-conductor cordset.
120 volt units are supplied with a molded 3-prong grounding-type
plug (NEMA 5-15P), and should be used in combination with a
properly connected grounding-type outlet as shown in Figure 1.
If a grounding-type outlet is not available, an adapter as shown in
Figure 2 may be obtained to enable a 2-slot wall outlet to be used
with a 3-prong plug.
As shown in Figure 3, the adapter must be grounded by attaching
its grounding lug under the screw of the outlet cover plate.
CAUTION: Before using an adapter, it must be determined that
the outlet cover plate screw is properly grounded. If in doubt,
consult a licensed electrician. Never use an adapter unless you
are sure it is properly grounded.
4
INTRODUCTION
Waring Commercial food processors are the most versatile food
®
processors in their class, featuring a LiquiLock
enables processing of large volumes of liquid without leakage and
the need to remove the S-blade while pouring. These professional
machines are prime examples of Waring's seventy-five years of
industry food service experience, as well as seventy-five years of
food processing experience.
The WFP16SCD is both ETL and Commercial ETL listed.
This instruction book describes the WFP16SCD, which comes
with a sealed work bowl (also known as a batch bowl) and a
sealed/locked cutter blade (or S-blade) to CHOP, GRIND, PURÉE
and MIX. The patented LiquiLock
processing large volumes of liquids with no leakage. Additional
discs provided allow for shredding, slicing and whipping directly
in the sealed batch bowl. For large volume processing, the
WFP16SCD includes a continuous feed chute. This option allows
anything processed with an accessory disc to be processed
directly into a separate container. The WFP16SCD is the first
of the LiquiLock series food processors to introduce dicing
®
operation making it the most versitile LiquiLock
available.
Size, power and convenience
The wide feed tube makes processing high volumes of larger
sized foods convenient and easy. The motor shaft is built for
durability. The housing, work bowl, chute, covers and pushers are
all made from durable polycarbonate for heavy-use conditions
and easy cleanup. The clear bowl and processing covers are
convenient for viewing food processing and are made of
heavy-duty material to withstand heavy-duty use.
® Seal System that
Seal System allows for
®
food processor
®
5