Breville Juice Fountain Crush Instruction Booklet page 21

TROUBLESHOOTING
POSSIBLE PROBLEM
Juicer will not work
or suddenly turns off
during juicing
Motor appears to stall
when juicing
Reduced juice
extraction
20
EASy SOLUTION
• Check that the power plug is securely inserted into
wall outlet.
• Insert the power plug into an independent outlet.
• Insert the power plug into a different outlet.
• Ensure the juicer is assembled correctly.
• The Overload Protection may have automatically de-
activated the motor. Unplug the power cord from the wall
outlet and allow the appliance to cool for at least 1 hour.
Insufficient cooling time may result in the motor
de-activating again. After sufficient cooling time,
reconnect the power cord to the wall outlet and
recommence normal use.
• Either too much food is being processed at one time or the
pieces are not small enough. Try trimming food, cutting
food into smaller pieces of even size and/or processing a
smaller amount per batch.
• Ensure the motor is running before loading the feed chute
with food. Also try the reversing method to unstuck the
screw.
• Hard fruits and vegetables will put excess strain onto
the motor.
• Stop the juicing process and remove the power cord
from the wall outlet. Use the nylon brush provided to
thoroughly clean the fine mesh holes of the Filter Basket.
Brush the inside of the Filter Basket under running water,
holding it up towards a light to ensure the fine mesh
holes are not blocked. If the holes are blocked, soak the
Filter Basket in hot water with 10% lemon juice to loosen
the blocked holes. Cleaning the Filter Basket will remove
excess fiber build up (from juicing the fruit or vegetables)
which could be inhibiting the juice flow.