Subaru 2015 XV Crosstrek Hybrid Owner's Manual page 446

9-8
In case of emergency/In case of a flat tire
4. Use the protrusion on the top of the
cap (5) to make a hole in the aluminum
seal on the sealant (4).
CAUTION
Be careful not to spill the sealant.
5. Insert the tube (7) with the application
cap (6) into the sealant bottle (4), and then
tighten the sealant application cap (6) until
it clicks.
6. Connect the compressor hose (2) to
the sealant application cap (6).
CAUTION
. Be careful to not allow the hose
to become twisted.
. When connecting the hose, be
careful to not strip the threads on
the application cap.
7. Remove the valve cap from the punc-
tured tire.
8. Connect the valve fitting (9) on the tip
of the application cap s rubber hose (8) to
the valve on the damaged tire, and tighten
completely.
CAUTION
The sealant might leak if the fitting is
not tight enough.