If the setting is not available, the following
notification will be displayed. In this case,
perform the setting procedure again.
Auto light sensor sensitivity setting
1. Perform the preparation steps accord-
ing to Preparation for car settings
2. Operate the
select the Auto Light Sensor item. Then
push the
button.
3-67.
3. The current setting will be displayed.
Push the
button to enter the selection
mode.
Instruments and controls/Multi function display
or
switch to
4. Select the preferred setting by operat-
ing the
button.
5. Select Set by operating the
switch, and confirm the setting by pushing
the
3-73
or
switch. Then push the
button.
CONTINUED