System Configuration - External Volume Control - Russound X125 Installation Manual

System Configuration with External Volume Control
The X125 and X225 amplifiers can be configured for large autoformer-based
volume control systems or speaker selectors. Connect up to eight (total)
impedance matching volume controls to the amplifier on speaker A and B
outputs (e.g., 8 on 'A' and none on 'B' , 4 on 'A' , 4 on 'B' , etc.)
Rev. 1

SYSTEM CONFIGURATION - EXTERNAL VOLUME CONTROL

Each amplifier has a minimum 4-ohm load in stereo mode, and minimum
8-ohm load in bridged mode.
INPUT
INPUT
Configuration with Autoformer Volume Control
Russound X125-X225 Installation Manual
9